00:00:01
hi everyone this is Vince with DTF station in this video we will guide you on how to perform maintenance on the Miro 24 the sections are divided into three categories daily weekly and as needed it's crucial to carry out this maintenance correctly to prolong the life of the equipment and avoid glycerin overflow glycerin is produced during the ink evaporation stage in the heat curing process is one of the components of ink that mostly turns into vapor during curing however some residue remains inside the

00:00:35
Shaker and can turn into liquid form potentially damaging the electrical components and causing output issues here are the tools you'll need to perform daily maintenance isopropyl alcohol lint-free cloths gloves and a brush once the printing is complete turn off all switches and leave only the purifier fan on open the heating chamber and run the purifier for at least 5 minutes to cool off the fan this will help evaporate some of the glycerin residue once the temperature in the heating chamber is below or around room

00:01:13
temperature turn off main power use a lint free cloth and isopropyl alcohol to wipe the oven [Music] surface clean the sides of the oven as glycerin can collect there pay extra attention to the left side side of the oven where the wires connect to the moo 24 body to prevent any liquid from pooling in that area wipe the top surface of the [Music] oven close the oven cover and clean the outer filter cover area open the filter cover and inspect all surfaces around the fan to remove any built up glycerin

00:02:21
conducting this daily will prolong the lifespan of both the fan and the filter if maintenance is not performed regularly the filters can absorb EXT ex glycerin diminishing their effectiveness and filtering debris and fumes [Music] once cleaning is complete close the top cover use isopropyl alcohol to wipe the surface the preheating plottin brush off excess powder inside the powder station directing it toward the bottom tray as much as possible be sure to clean around the sensor area without scratching the sensor

00:04:15
itself remove the media wheel from the powder station and clean off any powder residues if needed clean the rod with isopropyl alcohol use a lint free cloth and isopropyl alcohol to gently wipe the face of the sensor remove the bottom powder tray and pour it into a LED container to protect the powder from air moisture and dust powders are effective for one year but keeping them in the Shaker can contaminate the powder causing transfer issues or sticking when rolled into the takeup Reel store the container in a

00:04:50
controlled environment with a temperature of around 70° F and humidity below 35% away from direct sunlight keep used powder separate for troubleshooting purposes and mix it gradually with new powder insert the media wheel back into the powder Station close the cover and cover the entire unit with an equipment cover to prevent dust or debris from [Music] entering here are the tools needed for your weekly maintenance lint-free cloths isopropyl alcohol after performing all daily maintenance use isopropyl alcohol

00:05:28
and a lint-free cloth to clean the GL and cash trays on both sides of the machine [Music] cover the entire unit with an equipment cover to prevent dust or debris from [Music] entering here are the tools for the monthly maintenance fabric filter carbon cloth filter as needed or monthly basis it is recommended to regularly replace fabric filter carbon cloth filter for safety reasons for more details please contact your dtf station dealer or technician open the top filter cover to access the filters remove the fabric filter and

00:07:14
carbon cloth filter from the top part of the cover and place a new fabric filter and carbon cloth filter inside [Music] open the purifier fan metal lid remove the filters below and clean the area as needed before placing the new filter [Music] inside regularly check the filter as one side may become soaked more than the other swap the placement to ensure the filters are used evenly once done close the lid and ensure the carbon cloth filter is securely covering the surface from the outside cover the entire unit

00:08:24
with an equipment cover to prevent dust or debris from entering that's it for the video thank you for watching